|
Pentru produse uzuale consultati oferta
la shop.acvariu.ro,
un serviciu Acvariu.ro:
Daca ce va trebuie dumneavoastra nu este ofertat, puteti sa ne contactati.
Acvaristica de apa dulce
Acvaristica marina
Iaz / helesteu
Pentru a fi informati regulat pe email despre produse noi puteti sa va
inscrieti folosind formularul de contact (cititi politica de
confidentialitate).
| Echipament CO2 |
| Produs |
Pret |
prod |
| Echip complet CO2 + butelie |
160 eur |
AM |
|
CO2 complete contains all the
equipment required to provide CO2 fertilization in the aquarium. The
set contains the following:
- regular CO2 pressure
regulator
- counter CO2 bubble
counter
- reactor to allow the
CO2 gas to diffuse into the water efficiently
- CO2 cylinder holder,
cleaning brush and connection tube.
|
| Echip complet CO2 fara butelie |
120 eur |
AM |
|
CO2 complete contains all the
equipment required to provide CO2 fertilization in the aquarium. The
set contains the following:
- regular CO2 pressure
regulator
- counter CO2 bubble
counter
- reactor to allow the
CO2 gas to diffuse into the water efficiently
- cleaning brush and
connection tube.
|
| Solenoid valvel, Standard - nickel plated |
33 eur |
AM |
| The solenoid Valve Standard has
high quality body manufactured from nickel plated brass with a maximum
operating pressure of 6 bar. Pressure fittings for 6mm flexible hose
can be connected to all our C02 units. The solenoid coil consumes only
2.5 watts of electrical energy to prevent overheating. In conjunction
with a pH controller automatic control of the CO2 supply and pH can be
achieved. If used with a timer, the valve will provide a night shut off
system. |
AM = AquaMedic
Nota:
Preturile nu contin TVA
Produsele nu sunt in permanenta pe stoc.
La cantitati mai mari se pot oferi discount-uri
Alte produse disponibile (Aqua Medic) - phControllere, reactoare,
reductoare de presiune - detalii DOAR pt cei cu adevarat interesati -
folositi informatiile de contact
| Protein skimmer |
| Produs |
Pret |
prod |
| Air Driven Inside Skimmers - Midiflotor
|
55 eur |
AM |
|
The Midiflotor is a small but powerful
air-driven internal protein skimmer. Its principal feature is the
double reaction cylinder system: within the inner cylinder air bubbles
rise and carry large quantities of water upward. This water then falls
into the outer cylinder and carries the air bubbles downward to the
expansion cone, which stops the air bubbles. They therefore rise,
against the strong counter-current, and carry waste products to the
patented foam cup. This procedure ensures a long contact time for the
bubbles, making this a most effective but very compact skimmer. The
Midiflotor includes a robust mounting plate, allowing vertical movement
of the skimmer to regulate the foam production zone. A lime wood air
stone producing very fine air bubbles is also included.
|
| Motor Driven Inside Skimmers - Turboflotor
750 |
155 eur |
AM |
|
The Turboflotor 750 is a compact, motor
driven hang-in protein skimmer for aquaria up to 100 gal. It is
supplied with a large volume mechanical pre-filter. The venturi pump,
10-Watt with needle wheel impeller, sucks the air in automatically
mixes it with the water and pushes the mixture into the reaction pipe
(75 mm, 3 inch diameter). The pipe has an expansion cone with
postfilter at its bottom end. The foam cup is conical shaped to improve
the ejection of foam. The unique strong holding system allows safe
fastening and adjustment of the skimmer at the aquarium frame.
|
| Motor Driven Outside Skimmers - Turboflotor
1000 Multi |
175 eur |
AM |
|
Motor
driven external protein skimmer for aquaria of 120 - 250 gallons
The Turboflotor 1000 multi is a versatile protein skimmer. It
can be mounted on the side of the aquarium (?hang-on? mode), or placed
inside or outside the sump of the filter. Its compact size makes it
small enough to be positioned under the cabinet.
In ?hang-on? mode, the pump is placed inside the aquarium. This pump (Ocean
Runner PH 2500, 38 W) features a venturi with the patented ab Aqua
Medic needle wheel. The skimmer itself has our patented conical
collection cup and two outflow boxes for directing the water back into
the aquarium.
As
an option, a large 0.3 gallon Filter Box can be placed on the outlets
for use as a first stage biological filter.
Height: 22"
Total width: 7" x 7"
|
AM = AquaMedic
Nota:
Preturile nu contin TVA
Produsele nu sunt in permanenta pe stoc.
La cantitati mai mari se pot oferi discount-uri
Alte produse disponibile dar nelistate aici (capacitati mai mari)-
detalii DOAR pt cei cu adevarat interesati - folositi informatiile de
contact
|
|